Просмотр сообщений

В этом разделе можно просмотреть все сообщения, сделанные этим пользователем.


Сообщения - Александр Вольф

Страницы: [1] 2 3 ... 21
1
Компьютеры в астрономии / Re: Stellarium
« : 01 Октябрь 2022, 20:13:57 »
Сегодня вышла версия 1.0 планетария!

Полный список изменений занимает более ста строк (это самый большой выпуск по числу изменений).

2
Компьютеры в астрономии / Re: Stellarium
« : 16 Июль 2022, 17:41:30 »
Выпустили очередную версию планетария, в которой было много обновления кода и некоторое количество новых вкусностей :)

3
Компьютеры в астрономии / Re: Stellarium
« : 25 Декабрь 2021, 18:21:58 »
Вернусь к теме. Спрошу ещё раз.

По поводу сохранения моего места положения в стеллариуме.

Раньше не было этой проблемы устанавливаешь и всё, запоминает стеллариум сам, как я понимаю
Так как в шпаргалках, ранее которые делал, нет этого момента.
Значит стеллариум запоминал сам после перезагрузки.
Галка на скриншоте стоит нужная и всё должно быть запомнено. Правда то, что она "серая" говорит о том, что в местоположениях ничего не менялось.

Сейчас каждый раз, при входе в стеллариум, приходится забивать своё местоположение
Как его сохранить.?
Я забиваю просто город на англиском языке, в верху выходит дополнение что Кем. Обл. жму и всё устанавливается.
Возможно нужно рыть весь список, и искать там? Как правильно делать, что бы местоположение зафиксировалось?
А можно скриншот этого же экрана сразу после старта планетария?

4
Компьютеры в астрономии / Re: Stellarium
« : 25 Декабрь 2021, 18:16:27 »
Сегодня вышла очередная версия планетария, за номером 0.21.3 - https://github.com/Stellarium/stellarium/releases/tag/v0.21.3

5
Компьютеры в астрономии / Re: Stellarium
« : 19 Июнь 2021, 13:54:53 »
Я сегодня опубликовал пакет с версией 0.21.1RC2 и прошу принять участие в тестировании. Если всё будет хорошо, то в первой половине следующей недели будет релиз.

6
Компьютеры в астрономии / Re: Stellarium
« : 04 Август 2020, 15:57:30 »
Приблизив место где должны находиться кометы, C/2017 T2 (PANSTARRS) и  C/2019 U6 (Lemmon). они отобразились на экране, всё нормально.
При этом комета более яркая, и тоже находится в этом списке комет C/2020 F3 (NEOWISE).
Сейчас у себя проверил - не получилось воспроизвести эффект. С другой стороны в подсистеме визуализации тел Солнечной системы с версии 0.14.1 до текущей 0.20.2 много что менялось, поэтому какие-то проблемы действительно могут быть (я не припомню на вскидку таких проблем).

Её надо вызывать поисковиком, я не разбираюсь в этих тонкостях, мне не трудно её конечно вызвать.
Но решил спросить, чтоб понимать, почему более слабые по ЗВ. кометы отображаются сразу, а более
яркая комета. не отображается вообще, пока её не вызвать поисковиком.
В поисковике есть вкладка Списки, где можно выбрать только кометы ;) Более слабые кометы должны показываться "хуже", чем более яркие. На всякий случай, какие именно звёздные величины были у C/2017 T2 (PANSTARRS) и  C/2019 U6 (Lemmon)?

Ну и сразу хотелось бы спросить по этой эконке, ниже которой кнока удалить.
Как пользоваться этим окном?
Туда программа какие-то объекты грузит сама? или как там появляются объекты которые я не загружал.

Нет, сама она ничего не грузит. Часть объектов загружена пользователем, часть идёт в вместе с планетарием в виде "джентельменского набора" комет и астероидов.

И есть ли необходимость их от туда удалять, если известно, что комета эта к примеру уже не вернётся в нашей жизни)))
В общем понятие, об этом окне настройки?

Удалять объекты смело можно, а временами и нужно, т.к. чем больше объектов Солнечной системы загружено, тем медленнее работает программа (каждый объект же просчитать нужно), что может быть существенно для маломощных компьютеров.

7
Компьютеры в астрономии / Re: Stellarium
« : 13 Июль 2020, 22:42:32 »
Добавить в закладки адрес http://astro.vanbuitenen.nl/cometelements?format=mpc&mag=obs (этот источник называется "Gideon van Buitenen: comets" в современном Stellarium'е) и добавляйте кометы из него.

8
Компьютеры в астрономии / Re: Stellarium
« : 13 Июль 2020, 13:14:26 »
Не помогло, вот что я делал  :krasneet:2
Квадрат остался :krasneet:2
Это какой-то древний Stellarium, где-то в районе версии 0.12-0.13. Тогда имеет смысл запустить в режиме OpenGL1 (если он 0.12) или ANGLE (если он 0.13): Пуск -> Программы -> Stellarium -> ....

9
Компьютеры в астрономии / Re: Stellarium
« : 13 Июль 2020, 01:44:08 »
Попробуйте запустить Stellarium в режиме ANGLE

10
Компьютеры в астрономии / Re: Stellarium
« : 23 Июнь 2020, 10:46:17 »
Саш, спасибо! :) Как обновить свою версию?
Скачать новую, удалить старую, установить новую

11
Компьютеры в астрономии / Re: Stellarium
« : 23 Июнь 2020, 02:26:04 »
Сегодня вышла версия 0.20.2 планетария. Версия эта юбилейная, т.к. проекту исполнилось 20 лет.

Полный список изменений:
- Added rectangular sensor crop overlay support [Oculars] (GH: #1069)
- Added support newly marker in Search Tool (Position and Settings tabs) [Search Tool]
- Added new features for scripting engine: extend the JavaScript classes corresponding to Vec3f and Vec3d [Scripting]
- Added options to be able to define and use custom FOV circles for Telrad [Oculars] (GH: #1057)
- Added VecMath tests for the new functions (GH: #1055)
- Added VecMath feature: Vector/QColor conversions (GH: #1055)
- Added feature to set current date and time as initial data when AstroCalc/Ephemeris is open [AstroCalc]
- Added notification for user when version of DSO catalog is mismatched
- Added support Trumpler Catalogue (Tr or Trumpler) [DSO Catalog, v3.10] (GH: #965)
- Added support Stock Catalogue (St or Stock) [DSO Catalog, v3.10] (GH: #965)
- Added support Ruprecht Catalogue (Ru or Ruprecht) [DSO Catalog, v3.10] (GH: #965)
- Added support "van den Bergh-Hagen Catalogue" (VdB-Ha) [DSO Catalog, v3.10] (GH: #965)
- Added support search by long name for Trumpler, Stock, Ruprecht, Collinder and Melotte catalogues [DSO Catalog, v3.10]
- Added new type of DSO objects: region of the sky [DSO Catalog, v3.10] (GH: #1067)
- Added special case for improve DSO regions visibility [DSO Catalog, v3.10] (GH: #1067)
- Added outlines for DSO regions [DSO Catalog, v3.10] (GH: #1067)
- Added marker of center of FOV on the sky [Special Markers]
- Added circular marker of FOV on the sky [Special Markers]
- Added rectangular marker of FOV on the sky [Special Markers]
- Added tool for adjustable thickness of the planetary trails (GH: #1087)
- Added tool for adjustable line thickness for ephemeris lines (GH: #1087)
- Added tool for adjustable thickness of the planetary orbits
- Added a column, showing the elevation of the object at transit times into AstroCalc/WUT tool [AstroCalc] (GH: #1089)
- Added new category into AstroCalc/WUT tool: regions of the sky [AstroCalc]
- Added new category into AstroCalc/WUT tool: pulsars (the category available if Pulsars plugin is loaded and pulsars are enabled to display) [AstroCalc]
- Added new category into AstroCalc/WUT tool: bright nova stars (the category available if Bright Novae plugin is loaded) [AstroCalc]
- Added new category into AstroCalc/WUT tool: bright supernova stars (the category available if Historical Supernovae plugin is loaded) [AstroCalc]
- Added new category into AstroCalc/WUT tool: exoplanetary systems (the category available if Exoplanets plugin is loaded and exoplanets are enabled to display) [AstroCalc]
- Added new category into AstroCalc/WUT tool: active galaxies (this category may include additional quasars if Quasars plugin is loaded and quasars are enabled to display) [AstroCalc]
- Added new category into AstroCalc/WUT tool: interacting galaxies [AstroCalc]
- Added new unit tests for DeltaT
- Added tool to guess the group of satellites by their names [Satellites]
- Added new groups of satellites [Satellites]
- Added method to check state of loading for the plugins
- Added column Elevation for AstroCalc/Phenomena tool [AstroCalc]
- Added default groups for some satellites from default JSON catalog [Satellites]
- Added missing tool for define color of regions of the sky
- Added regions of the sky into Lists of Search Tool [Search Tool]
- Added tool to export version of Stellarium through StelProperty and Remote Control plugin
- Added display of epoch of the TLE for artificial satellites [Satellites] (GH: #1096)
- Added new flag for InfoString of planets, comets and minor planets
- Added better arrangement of InfoString entries for planets, comets and minor planets
- Added highlighting for string literals between apostrophes for Script Console [Scripting] (GH: #1101, #1107)
- Added highlighting for regular expressions for Script Console [Scripting] (GH: #1101, #1107)
- Added highlighting for multiline comments for Script Console [Scripting] (GH: #1101, #1107)
- Added highlighting for exponential numeric format for Script Console [Scripting] (GH: #1101, #1107)
- Added highlighting for hexadecimal numeric literals for Script Console [Scripting] (GH: #1101, #1107)
- Added separate highlighting of predefined names from that of keywords for Script Console [Scripting] (GH: #1101, #1107)
- Added red highlighting for unknown methods of Stellarium modules for Script Console [Scripting] (GH: #1101, #1107)
- Added highlighting for methods of StelSkyDrawer and core for Script Console [Scripting] (GH: #1101, #1107)
- Added penumbral and umbral magnitudes during lunar eclipse (GH: #1113)
- Added comments for scripters [Scripting]
- Added radar cross-section (RCS) data for satellites [Satellites]
- Added calculate approximaged visual magnitude for satellites from their RCS value [Satellites]
- Added special case for set RCS value for Starlink satellites [Satellites]
- Added option to allow drawing of landscape polygon only, if a polygon is defined [Landscapes]
- Added option to allow a polygon to be drawn in the foreground (out of regular call sequence) [Landscapes]
- Added option to allow landscape polygon overdrawn onto the 3D scenery [Scenery3D]
- Added computation an approximated angular size of satellites (the linear size is obtained from RCS value and we use spherical shape for satellites) [Satellites]
- Added special case for computation an approximated angular size of ISS (we are defined linear size of ISS by "hands") [Satellites]
- Added tool to display a focuser overlay in the sensor view [Oculars] (GH: #1110)
- Added checking conflicts for keyboard shortcuts with informing user if conflicts are exist (GH: #1025)
- Added tool to rescale oversize textures on-the-fly (GH: #1121)
- Added show a fuchsia-colored replacement texture for wrong filename (GH: #1121)
- Added NORAD numbers in addition to name of artificial satellite in Satellites Import Dialog for available for search [Satellites]
- Added function to compute distance between locations, on a flattened planet, in km
- Added geographic coordinates of center line for total and annular solar eclipse (GH: #1116)
- Fixed GUI and minor redesign of remaining icons [GUI] (GH: #752, #951)
- Fixed security issue for jquery (CVE-2020-11022; GH: #1073)
- Fixed magnitudes for planetary nebulae [DSO Catalog, v3.10] (GH: #913)
- Fixed data for "Part of a Galaxy" objects [DSO Catalog, v3.10] (GH: #996)
- Fixed work for clipboard in Script Console tool: avoid effects caused by QTextEdit after copy-paste from HTML pages. [Scripting] (GH: #1070)
- Fixed telescope syncing for INDI [Telescope Control] (GH: #1065)
- Fixed "Uninitialized members" issue in Script Console [Scripting]
- Fixed VecMath features: moved vector/string conversion previously in StelUtils to the VecMath classes (GH: #1055)
- Fixed VecMath feature:  moved un-inlineable definitions to separate cpp file (GH: #1055)
- Fixed proper motion output (GH: #1006, #1041)
- Fixed time delay with planet movement information (GH: #1006, #1103)
- Fixed cross-id data for open clusters [DSO Catalog, v3.10]
- Fixed designations for van den Bergh catalogues [DSO Catalog, v3.10] (GH: #965)
- Fixed descriptions for van den Bergh catalogues [DSO Catalog, v3.10] (GH: #965)
- Fixed crash in scripting method core.setObserverLocation() when planet is not defined or not exist [Scripting]
- Fixed core.setObserverLocation() behaviour: avoid duplicating a country if script programmer provides one [Scripting] (GH: #1076)
- Fixed object type info for meteor showers [Meteor Showers]
- Fixed crash when lens are deleted in Oculars plugin [Oculars] (GH: #1078)
- Fixed (a temporary fix) crash Stellarium when autoconnect is enabled for ASCOM device, but device is not attached [Telescope Control] (GH: #928)
- Fixed wrong approximated visual magnitude of satellites [Satellites]
- Fixed guessing groups of satellites [Satellites]
- Fixed possible cache problem for magnitudes
- Fixed casting warnings
- Fixed topocentric/geocentric corrections for ArchaeoLines plugin [ArchaeoLines]
- Fixed crash AstroCalc/WUT tool when required plugin is not loaded [AstroCalc]
- Fixed docs and tooltips
- Fixed visibility of deep-sky regions of the sky
- Fixed work of regions of the sky in AstroCalc/Positions tool [AstroCalc]
- Fixed missing object in Bennett's list of deep-sky objects (switched to synonym of missed object) [Search Tool]
- Fixed missing object in Dunlop's list of deep-sky objects (switched to synonym of missed object) [Search Tool]
- Fixed visual style for dialog to define custom equation of DeltaT
- Fixed crossquarter declinations in ArchaeoLines plugin [ArchaeoLines]
- Fixed updating timezones when loading landscapes/sceneries
- Fixed updating location panel when off-screen
- Fixed a deprecation warning for InfoString of planets, comets and minor planets
- Fixed broken highlighting for quoted string literals for Script Console [Scripting] (GH: #1101, #1107)
- Fixed broken highlighting for line comment for Script Console [Scripting] (GH: #1101, #1107)
- Fixed indentation problems in the code
- Fixed crash when removing already removed selection of constellations (GH: #1104)
- Fixed jumping of the Moon
- Fixed visibility for telescope selector when image sensor frame enabled after binocular [Oculars] (GH: #1108)
- Fixed saving thickness of the planetary trails and orbits
- Fixed context data for unit measure in Satellites plugin [Satellites]
- Fixed a stupid bug in ArchaeoLines [ArchaeoLines]
- Fixed sign of one element in the matrix sequence for nutation
- Fixed Scripting Engine bug: a script isn't terminated properly via the stop script button [Scripting] (GH: #1118)
- Fixed crash when texture isn't found (GH: #1121)
- Fixed the maximum size of CCD: increased limit of sensor size to 100000 pixels [Oculars] (GH: #1123)
- Fixed visual artifacts on the sky (GH: #475, #1126)
- Fixed bug in Vec3d constructor for scripting engine [Scripting]
- Fixed shader bug visible during Total Solar Eclipses only
- Updated default settings for InnoSetup Script (.iss) file
- Updated Stellarium User Guide
- Updated morphological classification of open clusters [DSO Catalog, v3.10]
- Updated subsystem to obtain the standard magnitudes of artificial satellites [Satellites]
- Updated method for load standard magnitudes and RCS data for satellites [Satellites]
- Updated size of window resize border to reduce difficulties to their resize (GH: #937, #1099)
- Updated InfoString block for artificial satellites [Satellites]
- Updated minimum height of artificial satellite to check the valid orbit [Satellites]
- Updated default source of Starlink TLE's [Satellites]
- Changed behaviour of GUI in Satellites tab in Satellites plugin [Satellites]
- Changed AstroCalc/WUT tool behaviour: radiogalaxies, active galaxies, quasars, blazars and BL Lac objects was moved from 'Galaxies' category into 'Active galaxies' category [AstroCalc]
- Changed behaviour of AstroCalc/WUT tool: let's use visual magnitude for all objects without extinction data [AstroCalc]
- Changed "Arguments" to "arguments" for highlighter in Script Console [Scripting] (GH: #1101, #1107)
- Removed obsolete scripting methods from StarMgr class [Scripting]
- Removed duplicate code for InfoString of planets, comets and minor planets
- Removed "Global" from highlighter in Script Console [Scripting] (GH: #1101, #1107)
- Removed unused variables

12
Компьютеры в астрономии / Re: Stellarium
« : 20 Апрель 2020, 21:52:03 »
Сегодня вышла версия 0.20.1 планетария (так быстро в основном из-за пользователей Windows).

Полный список изменений:
- Added new language - Luxembourgish (lb)
- Added proper properties for Angle Measure plugin
- Added configurable colors for Angle Measure plugin
- Added GUI adaptations for Angle Measure plugin
- Added evaluates scripts in individual context (Scripting Engine)
- Added new planetary nomenclature
- Added use properties in Satellites plugin
- Added overloaded Labeling functions with colors specified as Vec3f (Scripting Engine)
- Added display proper file paths and line numbers on script errors (Scripting Engine)
- Added test for low precision hms time conversion function (GH: #1043)
- Added spiky stars option
- Added checkbox to the option settings in Script Console to clear the output text before a script is run
- Added implementation of telescope syncing in INDI client (GH: #1048)
- Added dirty flag, set by signal from QTextEdit (Script Console)
- Added code to set TAB stop width at 4 characters (Script Console)
- Added code to avoid losing names after Cancel in some QFileDialog (Script Console)
- Added implementation of FSM to tranfer properly between dirty/filename states on load, save, clear, edit, expand actions (Script Console)
- Added special case Catalogs/Other in GUI for objects without identifier (DSO Catalog v3.9)
- Added Oculus plugin (disabled by default; GH: #1056)
- Fixed ANGLE support for Windows package (GH: #1035, #1034)
- Fixed keyboard navigation in Oculars plugin (GH: #1036)
- Fixed Russian translation for Windows installer
- Fixed data blunder: severely wrong slope for upcoming comet (GH: #1033)
- Fixed flipping galactic/Supergalactic labels on Southern hemisphere (GH: #1028)
- Fixed translations 'Set FOV to XXX degrees' when language is changed
- Fixed possible segfault in SolarSystem class
- Fixed building Stellarium without scripting
- Fixed (restored) fading switch effect in Satellites plugin
- Fixed (inverted) realistic/iconic mode labeling in Satellites plugin
- Fixed (renamed) properties to better follow conventions in Satellites plugin
- Fixed visualization mode in Satellites plugin
- Fixed time conversion for low precision form (GH: #1042)
- Fixed jerking an animation of movement of Solar system bodies (GH: #1041)
- Fixed name for SH2-308 (DSO Catalog v3.9)
- Fixed filter properly objects by catalogs (DSO Catalog v3.9; GH: #1052)
- Fixed few wrong objects in DSO catalog (DSO Catalog v3.9)
- Fixed WUI of Remote Control plugin
- Updated fix for ghost comet in ortographic projection issue (GH: #389)
- Updated list of contributors
- Updated code: simplified RegExp results handling
- Changed Vec3f& to Vec3f asreturn type for functions called from scripts in some classes (Scripting Engine)
- Re-implement getDecAngle, fixing some inconsistencies (GH: #1051)
- Removed Abell planetary nebulae catalog (DSO Catalog v3.9)

13
Компьютеры в астрономии / Re: Stellarium
« : 29 Март 2020, 23:19:54 »
Сегодня выпустили очередную версию планетария (за номером 0.20.0) с недельной задержкой относительно плановой даты выпуска.

Полный список изменений:
Сегодня вышла версия 0.20.0 планетария (с задержкой в полторы недели от плановой даты).

Полный список изменений:
- Added Almagest skyculture (GH: #1017)
- Added missing Ukrainian translations for landscapes (GH: #891)
- Added show an altitude of perigee/apogee for satellites (GH: #910)
- Added show an orbit inclination info for satellites (GH: #910)
- Added support INDIGO for Telescope Control plugin
- Added tool for extract dates of releases with their versions from ChangeLog and update list of these releases in stellarium.appdata.xml file
- Added particular refresh method for Oculars plugin to see immediate changes of CCD properties
- Added displaying last updated TLE for users
- Added a SIMBAD lookup name query to the Search Dialog (GH: #831)
- Added the configuration file and shell scripts to translate skyculture and landscape descriptions with po4a (GH: #908)
- Added new config and GUI option to change behaviour of focusing on day spinner in Date and Time dialog (GH: #939)
- Added context for name an asteroid (849) Ara to resolve translation issue
- Added a failure warning for Solar System Editor plugin (GH: #932)
- Added Cross-origin (CORS) support to Remote Control plugin (GH: #942)
- Added support for CORS preflight request to the Remote Control plugin (GH: #944)
- Added a minimum near clipping plane distance: slightly improves rendering of Saturn viewed from Pan (GH: #435)
- Added a GimbalOrbit for the "Observer" planets: allows arbitrary viewpoints by keyboard action (GH: #946)
- Added new nomenclature items
- Added new type of planetary feature
- Added automatize for creating Windows installers and signing them (GH: #969)
- Added configuring colors for ocular circles, sensor frames and text output in Oculars plugin (GH: #967)
- Added a toggle action to switch visibility of Ocular GUI button bar (GH: #964)
- Added allowing for assign shortcut for opening the config dialogues of plugins (GH: #964)
- Added display references for proper names of celestial object in description of skyculture
- Added texlive-fonts-recommended to apt-get install doc (GH: #959)
- Added hourly proper motion for planets, minor planets and comets (GH: #957)
- Added shortcuts to change GimbalOrbit distance
- Added actions for rotate reticles into Oculars plugin
- Added modern rotational elements for Solar system objects (GH: #950)
- Added linear model in the first approximation for smooth reduce the brightness of Jovian moons for get more realistic look (GH: #979)
- Added partitions to the Great Circles (GH: #993)
- Added properties for control of line partitions (GH: #993)
- Added fixed distinct length for 30, 10, 5, 1 degree marks for partitions (GH: #993)
- Added configurable thickness for partitions (GH: #993)
- Added German set of navigational stars
- Added nautical navigation data for navigation stars (GH: #955, #408)
- Added special name for landing location (translatable string "landing site") to avoid using "-" as name and good look
- Added comet C/2019 Y4 (ATLAS) as potential superbright comet (a Great Comet)
- Added asteroid (101955) Bennu (provisional designation 1999 RQ36) with texture (and nomenclature some time early)
- Added option to hide Scripts Console at script running
- Fixed script for installing asterisms data in Western: Rey skyculture
- Fixed typos in sky culture and landscape descriptions (GH: #892, #896, #899, #929, #927, #926, #905)
- Fixed restoring star labels state to default value after disabling displaying the Navigational stars data (GH: #898)
- Fixed work AstroCalc/Transits tool for pulsars
- Fixed displaying proper name and designation of pulsars (the output format was unificate with other objects)
- Fixed scaling FOV for CCD with OAG (Oculars plugin)
- Fixed resetting zoom level in Oculars plugin when CCD frame is rotation (GH: #895)
- Fixed name for M48 (GH: #902)
- Fixed CCD rotation issue (GH: #934)
- Fixed wrong text placement on center of screen, when vertical offset is defined (GH: #904)
- Fixed potential bug for updating standard magnitudes for satellites
- Fixed a spurious bad answer in Search Tool (GH: #831)
- Fixed location manager for API changes to GPSd 3.20 (GH: #925)
- Fixed updating TLE for satellites with leading zeros in ID (GH: #920, #897)
- Fixed data formatting for Meteor Showers Search Tool
- Fixed selection the meteor shower from Meteor Showers Search Tool
- Fixed Corona size on HiDPI screens (GH: #911)
- Fixed caching of precession values not being used (GH: #915)
- Fixed color conversion for markers of meteor showers from old format
- Fixed setting thickness of lines for constellations and boundaries
- Fixed jittering labels and moons hints
- Fixed the flawed 2013 brightness model for Venus
- Fixed manage slider by keyboard in AstroCalc/Graphs[Monthly Elevation] tool (GH: #936)
- Fixed crash when observer is on spaceship
- Fixed behaviour of draw the trails of planets
- Fixed opening User Directory in Script Console if scripts directory into User Directory does not exist (GH: #963)
- Fixed crash with the extrainfostrings
- Fixed behaviour of Bookmarks highlights: fool protection is enabled (GH: #917)
- Fixed enabling a reticle for eyepieces in Oculars plugin
- Fixed getting weird data for eclipse magnitude value during transits of inner planets
- Fixed viewing Phobos from Mars
- Fixed velocity value for KeplerOrbit around planets (GH: #950)
- Fixed a few potential problems (CWE-476)
- Fixed constellation lines for Babylonian (Seleucid) sky culture
- Fixed crash Stellarium, when meteor shower selected and you tried set date to outside the activity range of selected shower (Fix #975)
- Fixed crash Stellarium on trying select inactive meteor shower in Search Tool/Lists (Fix #975)
- Fixed displaying info for inactive meteor showers
- Fixed missing translatable strings for nomenclature data
- Fixed the time rate when Solar system body is selected: adjust time resetting for planet proper motion display (GH: #1006)
- Fixed GUI issue: switch off true time indicator when scene is paused
- Fixed false comet in orthographic projection (GH: #389)
- Fixed black rendering of lunar pole (GH: #992)
- Fixed hiding the cardinal points on "planetary observers"
- Fixed weird axis orientation of the Moon (GH: #974)
- Fixed name of a script
- Fixed hides data in Ocular plugin: changed the priority level of drawing for Equation of Time and Pointer Coordinates plugins (GH: #987)
- Fixed crash when observer is on spaceship and target planet is Solar system minor body
- Fixed location info string on bottom bar when observer is on spaceship
- Fixed compilation Stellarium on Solaris (Clang 9.0; SunOS 5.11)
- Updated set of GUI icons (GH: #804)
- Updated list of countries (ISO 3166-1 alpha-2) and list of locations (GH: #894)
- Updated list of contributors
- Updated Ukrainian translation of the sky culture descriptions (GH: #900, #907, #912)
- Updated GUI of the Satellites plugin: the color picker button was split into 3 buttons to define separate colors for info, orbit and marker of satellite (GH: #910)
- Updated "Save settings" button behaviour: when button "Save settings" are pressed, then emitted signal configurationDataSaved() and all plugins are saved the config data too (GH: #906)
- Updated scripts
- Updated Scripting Console (GH: #995)
- Updated code for Orbit class: combined EllipticalOrbit and CometOrbit classes to KeplerOrbit
- Updated list of MSVC versions for StelLogger class
- Updated GUI for Oculars plugin and changed focus policy for Oculars GUI buttons (GH: #956)
- Updated GUI for Information tab: define new ProperMotion InfoStringGroup flag, and adapt GUI, settings and StarWrapper (GH: #957)
- Updated InfoString: improved readability (HTML symbol syntax instead of Unicode char numbers)
- Updated GUI and shortcuts info for Oculars plugin
- Updated GUI for Script Console
- Updated Moon phases info: Restore/sanitize handling of named moon phases (GH: #950)
- Updated trails behaviour: when planet is changed the trails should be recreated
- Updated trails behaviour: include moons of current planet into planet trails
- Updated trails behaviour: allow limitation (early cutoff) of trail length
- Updated behaviour for selection of meteor showers in Search Dialog (Ctrl+Alt+M) of the Meteor Shower plugin
- Updated default list of TLE sources in Satellites plugin
- Updated Korean translations for Windows Installer (GH: #980)
- Updated DSO names: synced few names from SIMBAD
- Updated the pulsars catalog and tool for generate of JSON catalog from the original data (GH: #989)
- Updated SSD: synced the data by JPL HORIZON for some Solar system minor bodies
- Removed outdated and abandoned code
- Removed code for separate handling hotkeys from Oculars plugin
- Removed unnecessary orbit data from Comets and MinorPlanets (GH: #950)
- Removed of code repetition (GH: #950)

14
Компьютеры в астрономии / Re: Stellarium
« : 22 Декабрь 2019, 19:55:10 »
Сегодня вышла в свет очередная версия популярного свободного планетария Stellarium, визуализирующего реалистичное ночное небо, как если бы вы смотрели на него невооружённым глазом, либо через бинокль или телескоп.

В общей сложности список изменений с предыдущей версии занимает более 100 позиций:
- Added Vts plugin (GH: #880)
- Added Chinese translation for skycultures (GH: #788)
- Added support superior and inferior conjunctions for inner planets in AstroCalc/Phenomena tool (GH: #789)
- Added support greatest elongations for inner planets in AstroCalc/Phenomena tool (GH: #789)
- Added compute stationary points in AstroCalc/Phenomena tool (GH: #789)
- Added new groups of objects for AstroCalc/Phenomena tool
- Added magnitudes for AstroCalc/Phenomena tool
- Added brightness limit for planetary nebulae (speed-up for AstroCalc/Phenomena tool)
- Added 2 new functions for AstroCalc/Graphs tool
- Added support of connecting line between the ephemeris markers (GH: #758, #805)
- Added support skipping of labels for visualization of data into AstroCalc/Ephemeris tool (GH: #758)
- Added acknowledgements entry for plugins
- Added some more references and acknowledgements for few plugins
- Added some DSO textures (GH: #798, #824, #878)
- Added new GUI options and tooltips for AstroCalc/Ephemeris and AstroCalc/Phenomena tools
- Added parallax accuracy info for the stars (GH: #87)
- Added new planetary nomenclature
- Added selected dwarf and minot planets for AstroCalc/Phenomena tool
- Added error info for distance (taken from parallax)
- Added heliocentric speed to Apex markers
- Added support of SYNC command for LX200 and NexStar protocols (Telescope Control Plugin) (GH: #667, #727)
- Added asteroid (162173) Ryugu and moon Puck (Uranus XV)
- Added filters for open/globular star clusters in DSO tab (GH: #841)
- Added categories "open star clusters" and "globular star clusters" into AstroCalc/WUT tool (GH: #841)
- Added new type of shape for markers (MarkerMgr/scripting)
- Added new option for visualization of ephemeris markers (AstroCalc/Ephemeris tool)
- Added tool for smart format dates of ephemeris on the sky (AstroCalc/Ephemeris tool)
- Added new option for CCD (switching scaling FOV) in Oculars plugin (GH: #834)
- Added option to allow drawing FOV outline for ocular (Oculars plugin)
- Added an optional cardinal points to the ocular view (GH: #421)
- Added some stars to Chinese skyculture and Chinese contemporary skyculture (GH: #848)
- Added option to enable align the crosshair in equatorial coordinate system (GH: #852)
- Added option to use one color for info text (overwrite color mode) for all objects
- Added ASCOM telescope client into Telescope Control plugin (Windows only) (GH: #761, #406)
- Added 2 new config options for developers to build Stellarium package
- Added Pinyin transliteration to Chinese sky culture (GH: #867)
- Added support display of asterisms and ray helpers for Western (Rey) starlore (GH: #855)
- Added tool with keyboard shortcut for deselect the selected object (GH: #857)
- Added new tool (AstroCalc/Transits) info AstroCalc window (GH: #872)
- Added new option (duration) into AstroCalc/Graphs [Graphs] tool (GH: #874)
- Added an optional calculations for perihelion and aphelion of the planets into AstroCalc/Ephemeris tool (GH: #874)
- Added tool to adjustable line thickness of celestial grids and lines (GH: #828)
- Added line thickness setting into ArchaeoLines plugin
- Added new stars and exoplanets names according to IAU NameExoWorlds
- Fixed coordinates for Taldykorgan (Kazakhstan) (GH: #782)
- Fixed drawing of Off-Axis Guider (GH: #784)
- Fixed wrong rendering FOV through eyepiece when telescope is changed (GH: #211)
- Fixed parsing the designation of interstellar objects for MPC online search tool
- Fixed compute minutes in low precision case from deciman hours (GH: #792)
- Fixed double (mirrored) ephemeris lines in perspective projection (GH: #811, #813)
- Fixed exclude moons from compute of greatest elongations and stationary points on non-terrestrial locations (AstroCalc/Phenomena tool)
- Fixed compute behaviour for "Sun, planets and moons" option on non-terrestrial locations (AstroCalc/Phenomena tool)
- Fixed cache problem for compute Moon's age in some cases
- Fixed crash in AstroCalc/Ephemeris tool in specific cases (GH: #822)
- Fixed displaying obvious wrong distance for stars (GH: #402, #404)
- Fixed wrong rendering the screen in night mode with fractional scaling (GH: #827)
- Fixed getting revision number for non-release builds when git is not installed or using source tarball
- Fixed wrong distances of the clusters in the Large Magellanic Cloud (GH: #840)
- Fixed crash when star catalogs description is updated
- Fixed abbreviation of asterism Sudor Ophiuchi
- Fixed wrong zooming in Telrad (GH: #832)
- Fixed about data for Oculars plugin and updated the version of plugin
- Fixed support mirrored cardinals for ocular view
- Fixed crash when "gravity labels" is enabled (GH: #847)
- Fixed the space char problem for gravity labels
- Fixed work scripting functions saveState and restoreState (GH: #849)
- Fixed font scaling for text around CCD frame for HiDPI screens
- Fixed translation errors in Danish (GH: #865)
- Fixed saving of stars twinkle setting (GH: #862)
- Fixed crash for saving file in AstroCalc/WUT tool when category of objects is not selected
- Fixed obtaining some data for plot graphs in Exoplanets plugin
- Fixed DSO catalog (unexsist objects)
- Fixed object information text color in eyepiece view at daytime (GH: #858)
- Fixed plot for culmination height jumps at daylight saving time (GH: #876)
- Fixed crash with negative JDs
- Fixed setting the minimum data step for labels in AstroCalc/Ephemeris tool (GH: #871)
- Fixed translation issues for Nomenclature
- Fixed translation issues for Nebulae
- Fixed translation months of activity for the meteor showers
- Fixed solar halo drawing issue (GH: #879)
- Fixed ASCOM settings translation issue (GH: #881)
- Fixed for paths render with orthographic projection (GH: #811)
- Fixed wrap-around rendering artefacts for Comet tails in Cylindrical and similar projections
- Fixed artefacts in some projections for old-style landscapes (GH: #366)
- Fixed Date and Time dialog: set focus on day spinner by default (GH: #886)
- Updated outlines for DSO (the data taken from OpenNGC catalog)
- Updated TelescopeControl plugin: Attempt to fix protocol mismatches for LX200 (GH: #818)
- Updated some DSO textures (GH: #783, #798, #815, #817, #824, #878)
- Updated scripting engine documentation
- Updated Stellarium User Guide
- Updated options for Windows installer (GH: #819)
- Updated AstroCalc/PC tool
- Updated parallax info string: let's use milliarcseconds for parallax for whole planetarium
- Updated default bookmarks for asteroids in Solar System Editor plugin
- Updated default bookmarks for comets in Solar System Editor plugin
- Updated the initial steps for newly added minor and dwarf planets into AstroCalc/Phenomena tool
- Updated rules for including OpenSSL libraries into Windows package (GH: #786)
- Updated GUI for Sky and viewing options window
- Updated attributes for HDPI support
- Updated lunar terminator visibility
- Updated ephemeris marker style: it was switched to use new type of shape to balancing the visual style
- Updated spectral data for HIP stars from SIMBAD/Gaia data
- Updated variable stars data (HIP subset from GCVS 5.1 catalog)
- Updated behaviour: hide zodiacal light when whole Solar system bodies are hidden
- Updating StelProperty behaviour: allow suppression of a warning when a StelProperty cannot be found - should be used when requesting plugin properties!
- Updated AstroCalc/Ephemeris tool: excluding moons from list of celestial bodies (except the moons of current planet) to simplificate.
- Removed filter for star clusters from DSO tab (GH: #841)
- Removed "star clusters" category from AstroCalc/WUT tool (GH: #841)

15
Компьютеры в астрономии / Re: Stellarium
« : 17 Декабрь 2019, 23:19:11 »
Есть кто-нибудь, готовый помочь с китайским? Сразу предупреждаю - задача достаточно лёгкая, но объёмная и несколько однотонная, поэтому не очень быстрая (а робота я не хочу использовать из-за того, что потом в возможных ошибках трудно будет разобраться)...

Страницы: [1] 2 3 ... 21